VCDS Setup European Headlights

EURO HEADLIGHTS (ambers off unless turn signal is on, also enables high beams + fogs)

Step 1:
Click on the [09-Cent. Elect.] button.

Step 2:
Click on the [Recode – 07] button.

Step 3a (XENON):
Change the Software Coding to “01021” and click the [Do It!] button to recode this module. If you want to revert back to the original coding, use “01023”.

Step 3b (HALOGEN):
Change the Software Coding to “01001” and click the [Do It!] button to recode the module. If you want to revert back to the original coding, use “01003”.

APPENDIX 1 – Code Listing from moroisanorange:

Note: I have only performed the aforementioned tasks, any other codes listed below are personally uncharted territory.

Note: All codes below are for the B7 platform. B6 platform codes *may* be different, depending on the model year.

Note: In all codes below, #=existing digit, not relevant to mod in discussion, DO NOT change.

Euro Headlights & DRL
Module 09 (Central Electrical), recode to ###XY, where:

X = DRL
0 – Halogen without DRL
1 – Halogen with DRL
2 – Bi-Xenon with DRL
3 – Bi-Xenon without DRL
4 – Bi-Xenon with DRL / tail light / license plate light

Y = Locale
1 – Rest of World / Nordic Countries / Denmark / Croatia / Baltic Countries with Bi-Xenon
2 – Nordic Countries / Denmark / Croatia / Baltic Countries without Bi-Xenon
3 – USA / Canada with Bi-Xenon
4 – Canada without Bi-Xenon
5 – Special Vehicles

Note:
This mod tested on bi-xenon cars only; halogen cars may not work as intended.